E2-X Catch Cans

$99.00 - $429.00
3.00 LBS
$10 Domestic U.S. shipping | AK, HI & Int'l calculated at checkout

Order By Phone

Call 877-838-8311

Safe & Secure

Online Shopping
(9 reviews) Write a Review



The E2-XTM Single outlet system:

The most in-depth mix of flow dynamics and air/oil separation combined to provide the most effective non-centrifuge system to date.

The E2-X utilizes a unit sized to properly allow for the CFM of flow of today's PCV systems that allows for the speed of flow through to slow to the point of not only allowing the suspended liquids to separate fall, but also prevents liquid droplets from being "pulled through" and out as most other cans allow. The Patent Pending internal design directs the liquid laden vapors from the PCV system through 3 separate chambers with optimized coalescing, condensing, and baffle separation as each step separates and removes not only suspended oil mist, but also un-burnt fuel, sulfuric acid, and the abrasive carbon and soot particles that contribute to premature engine wear and the intake valve coking issues that plague ALL of today's Direct Injection gasoline engines resulting in the prevention of intake valve deposits, longer engine life, increased fuel economy (due to the reduction in ignition timing through knock-retard) and reduced tail-pipe emissions.

Unlike most "catch cans" on the market that only trap a small portion of these compounds allowing most to still pass through and contaminate the intake air charge, the advanced technology of the E2-X separators trap and retain up to 95% plus of these compounds and while most cans only trap oil for the most part, the E2-X goes further in trapping the other damaging combustion by-products. The added capacity of 12 oz's vs some popular cans with 1.5-2 oz's allows most to go 5k miles before needing to be emptied (all engines are different, so check at 1000 mile to determine your engines fill rate), especially in cold winter climates.

Features include:

  1. Large coalescing chamber utilizing corrosion resistant Stainless Steel coalescing media and 100% even dispersion through this media.
  2. Two separate condensing chambers with a primary condensing and collection chamber and a secondary chamber that provides the most complete contact with the outer wall for cooling and separating any remaining suspended compounds that may get past the first two.
  3. A completely separate outlet chamber where the flow for the 4th time slows to allow any remaining droplets to fall from suspension allowing the cleanest vapors possible to exit.
  4. Easy to drain high quality chrome plated brass 1/4 turn ball valves with provisions to add remote drain hose.
  5. Billet aluminum low cracking pressure check valve to prevent any back flow during heavy acceleration.
  6. Universal billet clamp that allows most any mounting configuration.
  7. Billet 6061 T6 Aluminum modular quality construction.
  8. The ability to easily convert to a dual outlet as needed in the future. (parts available from us direct or any of our dealers).
  9. No "mixing" of the incoming oil/etc. laden vapors from the cleaned separated outgoing flow at any time during its passage through the system.
  10. 100% closed EPA compliant in all States except CA. (pursuing CARB cert for CA currently).
  11. -6 or -8 90* swivel AN fittings STANDARD! (Braided hose extra).

Note: The Catch Can "KITS" INCLUDE EVERYTHING YOU NEED FOR A PLUG-PLAY INSTALLATION (hoses, mounting bracket, clamps, hardware, check valve, and Clean Side Separator)

Note: The Catch Can "ONLY" - include everything you need (hoses, mounting bracket, clamps, hardware), but does NOT include the check valve or Clean Side Separator.

No pollution or increased engine wear from a "vented" or "breather" system that is NOT street legal. No defeating the critical functions of the PCV system (it performs several critical functions to prevent premature engine wear and failure, far more than just a pollution control device as many assume). Purchasd with the Elite Billet clean side separator for a complete system addressing all aspects of the modern PCV system or purchase separate.

The E2-X single outlet system is recommended for those with a Naturally Aspirated engine that is not raced or driven hard and roots style (top mount) Supercharged vehicles that are not raced or driven hard. Excellent for Fleet use on cars, light trucks and vans where fuel economy improvement is the primary goal or the everyday driver that wants long term protection from intake valve coking and extended engine life.

The E2-XTM Dual outlet system:

All the features of the E2-X single outlet and more! A must for the aggressively driven NA or roots style SC vehicle, and all forms of turbo or centrifugal super charging where the intake manifold becomes pressurized by boost and a secondary evacuation suction source is needed. The dual valve addresses crankcase pressure building due to lack of intake manifold vacuum under acceleration and intake manifold drops to zero due to reversion pules that occur under acceleration by always providing a near constant evacuation and flush flow through the crankcase without venting to the atmosphere. The dual outlet series allows the user to tap into the suction available pre-throttle body to take over the evacuation when under acceleration on NA engines and top mount SC engines, or the turbo/Centrifugal SC inlet for those that have not found a suitable solution for the unique requirements for proper crankcase evacuation, avoiding pressure buildup in the crankcase, and wanting to maintain emissions compliance for street use WITHOUT sacrificing the longevity and durability of your engine as the "Vented" or "Breather" solution do. Do it right, or don't do it at all!!

The E2-UltraTM System!

For big boost, Big cube, Stroker and high HP builds!! The Ultra is the Ultimate! Capable of properly dealing with added crankcase pressure and the added capacity needed to properly evacuate the extreme builds. All the features of the E2-X times two. Up to 20 oz capacity and over twice the size coalescing chamber and condensing chambers. For that difficult build where you need the benefits of a belt driven vacuum pump but need it to last on the street, look no further. Capable of handling builds up to 1,000 plus HP and eliminate most oil ingestion caused detonation AND maintaining a emissions compliant system. Standard with either -6 or -8 AN fittings and correctly sized billet check valves, mounting brackets and hardware and all the fittings and vapor line needed to install your system. The E2-X Series. The most effective, engine extending proper emissions compliant Air/Oil PCV separating systems available with the latest in all the technology required to address all the shortfalls of the other popular cans on the market! The Original Elite Engineering can is still available for the budget minded that want to protect their engine but don't have the budget for the Ultimate E2-X series.


Note: The Catch Can "KITS" INCLUDE EVERYTHING YOU NEED FOR A PLUG-PLAY INSTALLATION (hoses, mounting bracket, clamps, hardware, check valve, and Clean Side Separator)

Note: The Catch Can "ONLY" - include everything you need (hoses, mounting bracket, clamps, hardware), but does NOT include the check valve or Clean Side Separator.


Product Reviews

  • 5
    Great Product for Turbo GM LS

    Posted by Karl Rickards on 5th Mar 2021

    Did a lot of research and even considered designing my own system, but the E2-X Catch Can certainly ticked all the boxes for me when it cam to a well engineered product for a single turbo LS Engine. Product is well made and there is no compromise in the products they use. Even the venting hoses are Continental branded.

  • 5
    The best complete catch-can kit. That truly works.

    Posted by ATHBI NAYEF AL SABAH on 3rd Jul 2020

    I have had ordered the Elite Engineering E2-X catch can for multiple vehicles. The first OCC kit i bout was installed on my 2016 Chevy Silverado 5.3 V8. Two of my friends asked me to order them the same kit for their 2016 Chevy Tahoe's , as soon as i showed them what the OCC has catched that would have eventualy re-entered the engine. They saw the true potential of the E2-X catch can's work of catching the blow-by gasses. There is always collection of oil & fuel blow-by even after driving the vehicle for a merely short distance. 500-1000 km (300-600 miles). The collective liquid is a mix of oil, fuel & water condensation. Since i live in Kuwait which is known for it's dry & hot climate. In colder climates, there will be much more water condensation with the oil. If you are reading this, I truly advise that you buy an Elite Engineering catch can for your vehicle. I have been amazed on how much blow-by junk was saved from going back into the engine via the PVC system.

  • 4
    Great at catching oil, but drainage valve leaks vacuum and oil

    Posted by Kevin A Marks on 5th Nov 2019

    Everything works great as far as catching oil. The oil cap Clean Side Seperator seems to be working as it should as well, no oil in that tube, yet. I found the can drain valve will not stay closed which makes it leak both vacuum and oil. I had to purchase a 3/8" threaded plug for the valve piece. I tried tightening the screw holding the valve handle in place and could not tighten it any more than it was out of the box. I would recommend installing a higher quality drain valve or including a 3/8" tapered thred drain plug with the kit. I haven't reseseched if this is a common issue, however, it definitely was with mine. I would also recommend including a couple 3/8" "T" fittings as my setup required two. Otherwise, happy with my purchase and looks of the install.

  • 5
    You'll be surprised on how much oil is caught

    Posted by Unknown on 28th Jun 2019

    Catch cans do work. At a recent weekend at the track, this catch can collected about 6oz of liquid. It's not pure oil, as my oil level never dropped. Does take some time to install properly.

  • 4
    Well Engineered

    Posted by Mason L. on 4th Jun 2019

    Well Engineered unit with overall nice hardware. Only thing left to be desired is all the photographs online show on the dual port cans 3 black AN fittings but you only recieve 2 and one plastic for the second port. Wish there had been an option or fine print noting this as i would have gladly paid the extra to have all matching fittings. Whats a couple more dollars at the price point of a complete E2-X kit?

  • 5
    Excellent quality, excellent Service

    Posted by Unknown on 5th Feb 2019

    Steve and the team at Elite were very helpful. I probably called six different times, and they were great! Thank you. Will buy again.

  • 5
    Excellent quality

    Posted by Jeremy on 8th Apr 2018

    Excellent design, great service and fast shipping. Thanks

  • 4
    Quality product

    Posted by Kyle D on 25th Mar 2018

    Very well engineered. Good job. Mounting location limited due to bracket length and orientation on a 2016 5.3L Silverado a lot of locations explored. Final install successful. Not enough 3/8 hose included for dual valve can. Also need 5/8 hose for bridging not included. Aluminum scratches quite easily when moving can within support.

  • 4
    Detailed Installation Requires Attention to Detail

    Posted by Forrest Thompson on 12th Mar 2017

    Just got the car out of storage and had time to do the install. All went well however it is a fairly long process. Instructions were a little sketchy a couple of places. One problem remains: I seem to be missing the "inlet flow restrictor' ??? Can you send me one ASAP? I don't want to drive much without it. We did add a small bracket to the connect the catch can bracket to the air inlet shroud. The catch can seemed to be quite flimsey without it. Please let me know how and when it ships. Forrest